How to make bracelets out of rubber bands bow
Craftsmen from all over the world included in a new kind of hobby kits Rainbow Loom. Standard equipment includes loom, hook, mixed colors loom bands, s-shaped clasp. This type of craft allows you to create unique items: jewelry, toys, accessories, pendants, keychains. To master a hobby, you must a variety of patterns and techniques. Videos and master classes below you will learn how to make bracelets out of rubber bands bow. Jewelry can be created on the machine, the slingshot, the hook fingers. Choose the tool that you have, and start!
Step by step instructions and diagrams of weaving loom bands bracelet «Bow» without the machine
The name of the accessory is received by the pattern that runs down the center decoration. This interesting bracelet bow can follow several techniques. These procedures involve the use not of the machine but with his own fingers, hook or sling. In work better to use a contrasting color of the irises for braiding and the Central pattern so that the finished product was bright and interesting.
Weaving on the slingshot
To weave a bracelet out of rubber bands – not an easy task because it need concentration to work, not to lose in the process. But if you get the algorithm and technique, creating jewelry will be for you easy. The entire length of the accessory is decorated with small bows, due to which it got its name. Use a phased instruction:
- Take the slingshot, turn so that the cut-outs looked in your direction. Throws three bands color braid: the first twisted three times and cling to the left column, the remaining two put on for both pins without twisting the figure eight, as shown in the pictures.
- Then throws the color of the pattern, that is, bows.
- Discharged into the center of the first twisted iris.
- Begin to alternate colors, matching color braid and bows. Touches one factory hook under the second from the top, grab the bottom, throw down in the middle. Do the same with the other side.
- Weave in the described sequence: catch the next color, start the hook under the second from the top, touches the bottom throws.
- Continue to weave in the technology described above, until we reach the desired length.
- To finish the ornament, remove the bottom hinge in the middle, move left from one column to another. Connect clip both ends of the product.
How to weave on the hook
The bracelet on the hook differs in appearance from the previous one. He has the appearance of a bow or butterfly, which the men wear on the neck. For netting products, you will need a better hook to use metal, not plastic, it is more convenient to work with. Here are step by step instructions:
- In three turns we throw iris on the hook. We catch a couple, drop, twisted in the center. Catch the hook for the second edge pairs.
- Remove the resulting design in the center of the next pair.
- We perform the second step three more times.
- Entered head start is received the hook braids.
- Remove the first loop to the center of the new couple.
- Repeat previous step 4 times.
- Enter the head of the hook to the center of the resulting weaving.
- Reset the first loop in the middle of the new couple. Repeat like 5 times.
- All loops reset for the next color pair of rubber bands.
- Continue to weave braid a new pair of reset loop with the hook. Remove the hook, catch the plastic clip. One half ready.
- Enter the head of the hook into the top loops.
- Repeat all the above steps, forming the second half of the product. Connect both ends of the clip. In the center of the bow throws twice as twisted pair.
The original method of weaving bracelet in the form of several bows
This method of weaving helps to make a bracelet, which consists of several bows. This is an easy and fast method, which is based on a simple braid. To work, you need to choose several colors of rubber bands for ribbons and extra iris for their connection among themselves. Follow these steps:
- The first elastic wound eight on the hook. Slipping over the edge of the new iris, to extend it through the two existing loops, then put the other end of the same clip on the hook. It turns out again 2 loops.
- Weave the braid with two irises. He slips the hook into the loop of the previous color, weave the second braid.
- Return the hook into white loop, make a third braid. Next threaded through all the loops.
- Repeat second and third steps, forming the second part of the bow.
- By repeating this technique, making several bows, while the decoration will gain the necessary length.
- Connect both ends of the product clip. In the middle of each bow worn, twisted several times gum.
How to make a bracelet out of rubber bands and clasps on your toes
Studied the following the master class, you will learn create an interesting bracelet. It consists of elements in the form of ribbons which are connected together with a plastic s-shaped clasps. The weave is very simple because you will need to memorize the stages of creating a single part, then repeat the above procedure several times. Choose contrasting colors that complement each other shades of the bracelet looked bright and beautiful. Step by step instructions:
- Twist the elastic twice. Add one on the end catches the clip as shown in photo.
- Make five such petals. Choose colors so that the middle was different.
- Create several flowers. Proceed to the connection of separate parts: the three petals of one flower clips remove clip and hook it over the three petals of the second flower.
- As described in the previous step technology brings together all the elements.
- Lock the product in a circle.
Two-tone bracelet with a bow of the small rubber bands
From this master class you will learn the weaving of the bracelet in a bow. Select the rubbers of two colors: for main element and the connecting braids. During weaving you will need two hooks. Manual steps:
- Throws the first and second elastic eight. Skip all the loops through the new iris.
- Two elastics are finished using the left and right loop.
- Add three more iris, promazyvaya first through the outermost loop, the second via two Central, third.
- Add four more: two on the edges, two in the center.
- Through all loops extend the iris is a different color, swapping Central.
- Begin to weave the half of the band: each time the hook will stay four loops, two of which are Central need to swap before adding new rubber bands. One iris is threaded through two loops, the second in the remaining.
- Continue weaving the bracelet according to this scheme: you cross between the two Central loops, adding two new bands, one passing through first two loops, the second in the last two, continue to wear the elastics in sequence. At the end of the joining clip.
- One part of the bracelet is ready. Second spin: pokes head hook in the four Central loops of the bow.
- One iris is threaded through all the loops on the hook. Weave the second part of the bow according to the technology described in 2-5 steps.
- Proceed to weave the rest of the chain. Repeat steps 6-7 until you achieve the desired size. Both ends joined by a plastic clasp.
Video tutorials for beginners weaving bracelet «Bow» on the machine
Netting of small silicone rubber bands is a fascinating hobby that brings many benefits to young seamstress: develops imagination, fine motor skills, diligence, attentiveness. Having mastered the basics of this hobby, every girl wants to do a lot of different jewelry, toys, accessories. The following YouTube video from Sergei and the other masters, you will learn how to weave a bracelet bow. The finished product looks very nice, and from its inception you will get a lot of pleasure.
You will need a special machine. It was invented by the engineer, to diversify the leisure of their daughters. It represents the rows of pegs, which are fixed to the three fixed platforms. With the help of stringing colored rubber bands you get a variety of patterns and finished products. Having studied the visuals below, you will be able to master the weaving of the irises.