How to learn to knit
Many people have Hobbies that they love to do. Knitting is just such a pastime. Thanks to this activity leave a variety of products, toys or beautiful clothes. If you’ve never done but really want, that you have in mind, most likely, have a question on how to learn to knit. If this option is leisure activities you love, and you want to learn the business, acquire the necessary attributes of knitting and use step by step instructions below.
Required materials and tools used in knitting
To begin knitting, prepare everything you need beforehand. Without basic tools you nothing, so go to a special shop that sells everything for needlework, to purchase:
- Yarn of desired color (your choice).
- Conventional spokes.
- Knitting needles to knit braids or plaits. They look like normal, just curved in the middle.
- Circular. Ordinary spokes, connected by a special line. Need for crochet items in a circle or large canvases.
- Hosiery. Coming in a set of five pieces. Are used to knit in a circle socks, cap, hats, mittens. Four spokes are placed on the canvas in a circle, and with the fifth is promazyvanie loops. This way you will get a solid product that has no seams.
- Big needle with large eye. It will help to stitch the parts together.
- Clip for marking.
- Stud for the transfer of the loops to leave them nepovezane.
Step by step instructions and diagrams knitting from scratch
Once tools and materials are prepared, it’s time to teach the basics of knitting. Start with the first steps: set of loops, execution of front and rear surface, knitting a small doily or fragments of any product it is. Don’t worry if something doesn’t work out. In the learning process you will have to redo everything anew. Below you will see step by step instructions describe how to learn to knit in the usual spokes.
The first step in the process of knitting of any product is a set of loops. To do this, use one of two basic ways. The first time, the following scheme may seem complicated to implement, but all this is easy to remember in the process of regular knitting. Practice this several times, using both options, to choose the more acceptable. After the description you will find a video which clearly shows how the gain loop.
The main method set the first row with the help of two spokes:
- The thread is put on the middle of the palm (the end should be at the bottom and the side, which leads to the ball – the opposite). The upper part of the circle around the thumb’s movement from right to left and lead to the index, embracing him from behind. Guide the Thread between the second and third fingers, put on the palm so that both of the tip to capture the middle, ring and little finger.
- Take in your right hand, both the spokes and pry down the loop that is on your thumb (on the back).
- Keep moving in the direction of the thread on the index finger, podawa her top down and again pass the tips of the first loop.
- Remove your thumb, tightening the knot on the right needle. In this case, both workers finger needs to fix the ends of the strands.
- Holding the thumb of the right hand received the loop on the needles, pull them down on themselves. It turns out that the thread is again around two fingers.
- This time podavaite spokes thread on your thumb upwards on the palm side and again drag in the loop on the index finger.
- Then again follow step 4.
- Repeat what is stated in paragraph 6, to dial a number.
With a cog:
- The thread is put in the palm to end out the bottom.
- The second side that goes through the arm on top, around the index finger, and originates in the coil, then clamp it between the ring and little finger.
- Pry the needle movement on the thread in the place where it touches the index finger. Immediately turn the tool from itself, so that the yarn twisted around it.
- Circle the needle around your index finger and insert it under the thread of the movement on itself (it turns out that you remove the thread with a finger).
- For each new loop execute movements referred to in paragraph 4.
How to learn to knit front and back loop
The knitting process of any product is always based on a specific technique, which consists of two types of loops: the front and reverse. The only change is their number in accordance with the instructions of the selected pattern. Study carefully the diagram before beginning work to avoid confusion. After reviewing the steps, you will be able to consolidate the instructions, watching the video.
The front loop of the first method:
- Thread keep in the back of the product.
- Free needle in thread in the middle of the loop.
- Pull from the rear wall of the filament, which leads to the ball, grabbing it with needle movement from the top down. Reset the loop which was on the left needle.
The front loop of the second method:
- The scheme remains the same as in the first method, only this time, the capture working thread from the front wall of the loop.
The reverse surface, the first way:
- Keep the working thread in front of the product.
- Free enter a pin for the front wall of the loop.
- Loop the working thread under the instrument in his right hand.
- Pull the thread caught up in the loop.
The wrong type binding, the second way:
- Insert the free needle in the front wall of the loop, pull the tool right below the surface was under him.
- Throw a working thread on the needle to pull it through the loop.
Lesson crochet headband 22
Method of knitting elastic bands 22 is the alternation of two types of knitting: front and back, two loops of each option. So fit the bottom of the sweaters, vests, sleeves, neckline, cardigans. How is this technique, see the step-by-step instructions on. Examining it will secure your skills at the video posted below. The sequence of the gum 22 is this:
- The first reset loop on a free needle. It is necessary that the edge was beautiful.
- The second loop provarite two front, then two purl.
- Continue to the end of the row.
- The last loop promazyvaya as always wrong, regardless of the pattern.
Knitting any pattern always involves the expense of loops and rows. You will perform both the left and the front surface. The harness is a pigtail, its creation requires the alternation of variants binding after a certain number of loops. Check out step-by-step instructions below on how to fit this picture. Here we use an example of knitting of fabric with a width of 12 loops. If the description would be incomprehensible to you, secure the equipment, checking the actions with the video.
- In this case, the pigtail is in the center and consists of six loops. Start number three wrong.
- After – tie 6 loops of the front surface.
- The last three wrong.
- The next row again, only this time provarite first three loops of the facial surface, and then – in pattern.
- When the columns of the braids will need to return to the canvas, link to at least four rows as described above.
- Reached the next front range, where the change pattern, proverite three reverse loops.
- Then begins a pigtail that fit the facial surface. The first three loops of harness skip and continue knitting with the fourth.
- Carefully remove all 4 loops. You can wear them on the pin.
- Loop the knit loop on the right needle. And three nepovezane – back on the left.
- Then knit in pattern.
- Be sure to remember how many rows is in front of every distortion of the harness, that the pattern turned out nice and neat.
How to knit waffle knit
This method of knitting involves a technique which is also based on a combination of the reverse and the obverse surface. Waffle is used to create the bottom of sweaters, sleeves, and edge socks, Slippers or cuffs on mittens. For the complete assimilation of the lesson study step-by-step instructions and video below, in which the master shows the sequence of English gum.
- Type hinges on two spokes, proverite one row 11: alternating front – back surface.
- The next line starts the drawing of the English bands: the first loop throw the tool in your right hand, and the next provarite as facial.
- After – run yo yarn on right needle. Provarite the reverse loop. Continue in this style, alternating between both mating.
- Next row knit like this: first remove the loop, and the second front promazyvaya through two stitches at the end.
Vyvazhivanie pattern of «Bumps»
Looking at the following diagram, you will meet an interesting pattern in the form of delicate patterns called «Bumps». To run it you will need a special technique that you can learn. This pattern is used for knitting different sweaters, hats, scarves, gloves. Follow the instructions below to learn how to do it. The video below will help you to consolidate the lesson.
- In the first loop the loop on the right needle, and the second provarite purl stitch. The next five will be face with nakida (as described in the lesson about knitting English gum), but promazyvaya from one loop to the current row.
- Next come the three reverse loops.
- Continue alternating to end of row. Stretch it and proceed to the next.
- This sequence of knitting is different: first, is the front loop.
- Each «Bump» is located on five rows, and the sixth closes the drawing.
- The first loop is thrown to the other spokes, following provarite as facial.
- Next come the 5 loops through them thread the needle and provarite another facial.
- The following three loops promazyvaya the front surface.
- Repeat these steps until the end of the row.
- Next row knit purl loops completely.
How to close the loop
When the product is ready, you need to finish the knitting. For this loop close to the canvas bloom. This method you will be able to learn how, read the step by step instructions on. If some point is unclear or if you need to fix the way of knitting, watch the tutorial video attached below.
- Provarite the first two loops. Of them you get a new one – place it on left needle.
- Repeat the movement, only this time with the loop. Swipe an item and continue knitting.
- Through two loops pull the thread: you have again formed a new – place it on left needle.
- Proceed down the row until all the loops.
- In the end you will have one loop. Provarite it, pull the needle and tighten the thread.
How to learn to read diagrams of knitting
To facilitate the process of creating the planned products with any pattern there are detailed schemes with description of the knitting technique. However, sometimes you read these instructions difficult, especially if you are an inexperienced knitter, because there are certain reductions. Be sure to pay attention to the interpretation that is given at the end, or remember the main acronym. Additionally, there are some rules of reading schemes. To read them you can below.
- If you use a schema that describes knitting in a circle, then read it from right to left.
- Always understand the instructions before the start of knitting, not to spend time reading during operation.
- The edge loop is indicated by a plus sign, and its reduction seems to be «chrome. p.».
- Wrong is spelled abbreviated as «Phi. p.». To find it in the schema you can use a white square which is crossed inside.
- Face loop cut diagrams as «L. p.» and indicate a black square.
- Yo looks abbreviated as «n» and has a sign in the shape of a triangle without a base.
Video tutorial on knitting for beginners
If you are enthusiastic and really want to learn to knit some models of things, first try to create a simple product – a deal. In the future, use a variety of lessons for beginners to get the skills of knitting. For example, see below for four videos, which in detail shows how to associate the original scarf; create two versions of warm socks for the winter; to follow cute baby booties for the youngest member of the family.