Palm tree made of plastic bottles

Palm tree made of plastic bottles with their hands photo

Today the owners of summer residences and personal plots are trying to decorate the exterior. Ways may be many, beginning with planting and ending with some buildings. One of the most budget options can be called handmade crafts out of plastic bottles. In this article we will show you how to make a palm tree for the infield of plastic bottles.

Materials for the palm of the bottles:

  • plastic bottles green and brown;
  • scissors;
  • metal sheet;
  • metal rods;
  • the metal sleeve and the tube;
  • the high voltage cable.

Master class palm tree made of plastic bottles with their hands

1. Pre-prepare bottles and clean them from the labels. Start with making the leaves of palm trees from green bottles. For this you need to cut the bottle in half.

Master class palm tree made of plastic bottles with their hands

Master class palm tree made of plastic bottles with their hands

2. Slice strips on top of the bottle along, but not until the end.

3. A cable with a diameter of 12-14 mm and it string bottle-sheets.

A cable with a diameter of 12-14 mm and it string bottle-sheets.

4. For one palm tree will need 7 leaves of palm trees, the length of which can be adjusted independently.

5. To make the stem, take the brown bottle and cut them into wide strips. You should get 6 wide bands along the entire bottle 2.5 L.

6. Also on the high-voltage cable metal string the piece for the trunk.

7. Start preparing the grounds for the palm.

Two metal rod (minimum length 25 cm) juice on a piece of metal. The bars need to weld at different angles

8. Two metal rod (minimum length 25 cm) juice on a piece of metal. The bars need to weld at different angles.

9. Take a tube with a diameter of 2cm, put them on the rods. Juice on the rod end of the metal sleeve, then through them it was possible to pass through the palm leaves.

Clip the leaves on the palm, bending the cable through the sleeve

10. Clip the leaves on the palm, bending the cable through the bushing.

11. Proceed to the preparation of the barrel upwards.

You can create your own plan palms from plastic bottles.

12. After the whole structure of the palm is collected, put it in the ground to a depth of 0.5 m.

Palm tree made of plastic bottles with their hands ready, now we can create a Paradise in your backyard. Don’t be afraid to fantasize, the size of the trees can be arbitrary, and instead of coconuts attach brightly colored plastic bottles of juice or sparkling water.

View video on the theme: palm trees made of plastic bottles

You can create your own schema of the palms from plastic bottles.

The first plastic bottle was developed in 1941, and today it is used not only for household purposes and water storage, but also as convenient and inexpensive material for crafting.

Понравилась статья? Поделиться с друзьями:
Добавить комментарий

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: